MIT - HF-1 Series Specifications
Humidity: 98%
Ingress Progression: IP64 (IEC 529) (Waterproofing & environmental protection)
Operating Time: Up to 3 months with normal use.
48 hours continuous at +25C (alkaline battery)
40 hours continuous at +25C (single rechargeable battery charge)
Battery: Standard 9 volt block battery, MN 1604, 6LR61 or equivalent alkaline disposable or rechargeable.
Tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions ("CE" mark)
Medically tested and approved - No risk to persons with pacemakers.
Non-interference to magnetic recorded material.
When the battery is exhausted a continuous tactile alarm signal is produced.
Alarm indication by means of vibrating tactile indicator.
Detection speed: Ultra fast; 'Detect - Alarm - Reset' ready for another target - 0.1 second.
Pinpoint target accuracy from APT search head at the base of index finger, concealed inside water resistant neoprene fabric lining.Adams MIT Hand Detector Gloves
The MIT has been specifically designed for pat down and hand search procedures where the operator wants to be in close contact with the subject being searched. The MIT can be worn on either the left or right hand or one MIT on each hand, giving the operator the power of two metal detectors in use at the same time! This gives the operator the ability for fast processing of people. When the operator has located a metal target, the MIT give an alarm indication by means of a vibration against the wearer's wrist. As the vibration is to the operator's wrist and not to the hand, the person being searched does not feel vibration. This offers the operator a covert approach to pat-down procedures. The MIT also gives the operator's fingers complete dexterity to feel for concealed objects that are of a non-metallic nature simultaneously. MIT is fully automatic and requires no adjustments for use. It is powered by one standard 9 volt battery or optional NiCad rechargeable battery. There are no visible wires, switches or buttons. Everything is housed in a machine washable, soft stretching neoprene (wet-suit) material. The operator just puts the MIT into the "on" mode and begins a pat-down search... It's that simple! ADAMS "MIT" DETECTS ALL METALS AND ALLOYS ("MIT" is sold as a single unit)
